39
Conguring Advanced settings
Setting up the DHCP Server
Your wireless router uses DHCP to assign IP addresses
automatically on your network. You can specify the IP address
range and lease time for the clients on your network.
To congure the DHCP server:
1. Click LAN on the left navigation panel.
2. Click the DHCP Server tab.
3. In the Enable the DHCP Server? field, tick Ye s.
4. In the IP Pool Starting Address field, key in the starting IP
address.
5. In the IP Pool Ending Address field, key in the ending IP
address.
6. In the Lease Time field, specify in seconds when an assigned
IP address will expire. Once it reaches this time limit, the DHCP
server will then assign a new IP address.
• ASUSrecommedsthatyouuseanIPaddressformatof
192.168.1.xxx (where xxx can be any number between 2 and
254) when specifying an IP address range.
• AnIPPoolStartingAddressshouldnotbegreaterthantheIP
Pool Ending Address.