EasyManuals Logo
Home>Asus>Motherboard>P5LD2

Asus P5LD2 User Manual

Asus P5LD2
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
4-164-16
4-164-16
4-16
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
PIO Mode [4]PIO Mode [4]
PIO Mode [4]PIO Mode [4]
PIO Mode [4]
Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]DMA Mode [Auto]
DMA Mode [Auto]DMA Mode [Auto]
DMA Mode [Auto]
Selects the DMA mode.
Configuration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2]
[MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3]
[UDMA4] [UDMA5]
SMART Monitoring [Auto]SMART Monitoring [Auto]
SMART Monitoring [Auto]SMART Monitoring [Auto]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]32Bit Data Transfer [Disabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
Configure SATA As [Standard IDE]Configure SATA As [Standard IDE]
Configure SATA As [Standard IDE]Configure SATA As [Standard IDE]
Configure SATA As [Standard IDE]
Sets the configuration for the Serial ATA connectors supported by the
Southbridge chip.
The AHCI allows the onboard storage driver to enable advanced Serial ATA
features that increases storage performance on random workloads by
allowing the drive to internally optimize the order of commands.
If you want to create a RAID 0, RAID 1, RAID 5, RAID 10 or the Intel
®
Matrix
Storage Technology configuration from the Serial ATA hard disk drives, set
this item to [RAID].
IDE Configuration
Configure SATA As [Standard IDE]
Onboard IDE Operate Mode [Enhanced Mode]
Enhanced Mode Support On [S-ATA]
IDE Detect Time Out (Sec) [35]
When in AHCI/RAID
mode SATA
controller is
forced to Native
mode.
4.3.54.3.5
4.3.54.3.5
4.3.5
IDE ConfigurationIDE Configuration
IDE ConfigurationIDE Configuration
IDE Configuration
The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you wish to configure the item.

Table of Contents

Other manuals for Asus P5LD2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus P5LD2 and is the answer not in the manual?

Asus P5LD2 Specifications

General IconGeneral
ECCNo
Number of memory slots4
Maximum internal memory4 GB
Processor socketLGA 775 (Socket T)
Processor manufacturerIntel
Maximum number of SMP processors1
CPU fan connectorYes
USB 2.0 connectors2
Manageability featuresWOL (PME) WOR (PME) Chassis Intrusion
Controller interface typeSerial ATA
Controller 2nd interface typeUltraDMA
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
BIOS typeAMI
BIOS memory size32 Mbit
Audio chipRealtek ALC882
Audio output channels7.1 channels
Motherboard form factorATX
Bundled softwareDrivers ASUS PC Probe II AI Booster AntiVirus ASUS LiveUpdate
Parallel processing technology supportNot supported
RAID levels1, 5, 10
Weight and Dimensions IconWeight and Dimensions
Depth23 mm
Width30.5 mm

Related product manuals