Notebook PC E-Manual
25
Charge the Notebook PC for 3 hours before using it in
battery mode for the rst time.
Connect the AC power cord to the AC/DC adapter.
Plug the AC power cord into a 100V~240V power source.
Connect the DC power connector into your Notebook PC’s
power (DC) input port.
Charge your Notebook PC.
IMPORTANT!
• Ensure that your Notebook PC is connected to the power adapter
before turning it on for the rst time.
• Use only the power adapter bundled with your Notebook PC.
• Power adapter information:
• Input voltage: 100-240Vac
• Input frequency: 50-60Hz
• Rating output current: 3.42A (65W)
• Rating output voltage: 19Vdc
To Next Page
Loading...
