Notebook PC E-Manual
43
Inserting an optical disc
1. While the Notebook PC is on,
press the drive’s eject button
to partially eject the drive’s
tray.
2. Gently pull out the drive tray.
IMPORTANT! Be careful not
to touch the optical drive lens.
Ensure that there are no objects
that may get jammed under the
drive tray.
Using the optical drive
(on selected models)
3. Hold the disc by the edge,
with its printed side up, then
gently place it inside the hub.
4. Push down the disc’s plastic
hub until it snaps onto the
optical drive hub.
NOTE: The actual location of the electronic eject button may vary
depending on your Notebook PC model.
To Next Page
Loading...
Need help?
General
