8
1.3 Your wireless router
LED On/Off button
Press this button to turn on/off the backlight LED on the panel.
Wi-Fi On/Off button
Press this button to turn on /off the Wi-Fi connection.
Power LED
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
2.4GHz LED / 5GHz LED
Off: No 2.4GHz or 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
LAN 1~4 LED
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
WAN (Internet) LED
Red: No IP or no physical connection.
On: Has physical connection to a wide area network (WAN).
WPS LED
Off: WPS verification process is off or completed.
Flashing: WPS verification process is activated.
USB 3.0 port
Insert USB 3.0 devices such as USB hard disks or USB flash drives into this port.
LED
WiFi
USB 3.0
To Next Page
Loading...
