Disassembly Procedure
V1.0
Bottom Case Module
The illustrations below show how to remove the Bottom Case Module.
Remove Bottom Case Module
1. Follow below numbers to remove 10 screws on the Bottom Case.
Assembly Notice: follow the reverse numbers to lock screws.
Screw tightening torque:[1-7] 2.0±0.2 kgf-cm,[8-9] 2.0±0.2 kgf-cm,[10] 2.0±0.2 kgf-cm
SCREW M2*3L D4.5 (K) W-NI NY
SCREW M2*8.5L(4.5,0.75) (K)#1