9 Instructions for use of air receiver
9.1 Instructions for use
1 This vessel can contain pressurised air; this can be potentially dangerous if the equipment is
misused.
2 This vessel must only be used as compressed air/oil separator and must be operated within
the limits specified on the data plate.
3 No alterations must be made to this vessel by welding, drilling or other mechanical methods
without the written permission of the manufacturer.
4 The pressure and temperature of this vessel must be clearly indicated.
5 There is no intrinsic need for service inspection of the vessel when used within the design
limits for its intended application.
6 Corrosion must be prevented under the conditions of use. Condensation may accumulate
inside the tank and this must be drained every day. This may be done manually, by opening
the drain valve, or by means of the automatic drain, if fitted to the tank.
Nevertheless, a weekly check by opening of the manual drain valve is necessary.
Instruction book
70 2920 7054 00
To Next Page
Loading...
Need help?
General
