Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels must be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
Data plate
A. Machine type
B. Maximum hydraulic pressure
C. Serial number
D. The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
E. The CE symbol means that the machine is
EC-approved. See the EC Declaration of
Conformity which is delivered with the machine
for more information.
Noise level label
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Labels on the accumulator
Read through the overhaul instructions carefully
before servicing or charging.
The accumulator must only be charged with Nitrogen.
NOTICE Only certified personnel are allowed to
work with the accumulator.
Guarantee
Guarantee
The guarantee or product liability will be invalidated
by the following:
● Use other than intended
● Maintenance work not being carried out or being
carried out incorrectly
● The use of the wrong consumables
● The use of non-approved parts
● Damage due to wear
● Special applications without the required safety
facilities
● Damage due to improper storage
● Changes not carried out by or in consultation with
the manufacturer
Transport
WARNING Falling hydraulic breaker
If the hydraulic breaker tips over and fall, it may
cause serious injury.
► Place the hydraulic breaker in a safe position
where it cannot fall over and cause damage.
© 2015 Construction Tools PC AB | No. 9800 1273 01d | 2015-12-30
Original instructions
12
SB 702, 1102Safety and operating instructions
To Next Page
Loading...
Need help?
General
