Technical data
Machine data
SB 1102SB 702
8460 0300 908460 0300 85Part number
1060 (2,300)720 (1,600)Service weight, kg (lbs)
789 (1,739)521 (1,149)Delivery weight, kg (lbs)
13-24 (29,000-53,000)10-17 (22,000-37,500)Suitable carrier weight class, tonnes (lbs)
680 (27)1,000 (39)Working length of working tool in standard version, mm
(in.)
120 (4.72)105 (4.13)Working tool diameter, mm (in.)
AutoStartAutoStartStart up mode
25(1)25(1)Hose inside diameter P, mm (in.)
25(1)25(1)Hose inside diameter T, mm (in.)
Capacities
SB 1102SB 702
100-13580-120Oil flow, l/min (gpm)
550-850600-1,050Impact rate, bpm
130-180120-170Operating pressure, bar (psi)
4034Maximum hydraulic input power, kW
2020Back pressure acceptance, bar (psi)
7060Accumulator gas pressure, bar (psi)
215205Pressure relief valve on breaker, bar (psi)
4 (58)4 (58)Water pressure, bar (psi)
≤ 11 (≤ 2.9 )≤ 11 (≤ 2.9 )Water consumption, l/min (gpm)
2 (29)2 (29)Air pressure, bar (psi)
≤0.73 (≤26)≤0.73 (≤26)Air flow, m
3
/min (ft
3
/min)
Noise declaration statement
SB 1102SB 702
9494Sound pressure
1
dB(A)
123122Sound power
2
dB(A)
1
Sound pressure level according to EN ISO 3744 in accordance with directive 2000/14/EC at 10 metres distance.
2
Guaranteed sound power according to EN ISO 3744 in accordance with directive 2000/14/EC inclusive spread
in production.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not adequate for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
breaker is used, as well as upon the exposure time and the physical condition of the user, and the condition of
the breaker.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values, instead
of values reflecting the actual exposure, in an individual risk assessment in a work place situation over which
we have no control.
© 2015 Construction Tools PC AB | No. 9800 1273 01d | 2015-12-30
Original instructions
26
SB 702, 1102Safety and operating instructions
To Next Page
Loading...
Need help?
General
