- 47 -
DURING OPERATION
Regularly carry out following checks:
1. Check all measurement views for normal
readings.
2. Avoid the engine running out of fuel.
Nevertheless, if this happens, fill the fuel tank and
prime the fuel system to speed up starting.
STOPPING
Press the stop button. Open the air outlet valves to
avoid that part of the system will remain pressurized.
After pressing the Stop button the display will show:
After cooling down the engine will stop and the
display will show
The engine is stopped, and the controller will do a
double check to see if the engine is really stopped.
The doors must be closed during
operation and may be opened for short
periods only.
Be aware not to touch hot parts when the
door is open.
When the engine is running the air outlet
valves (ball valves) must always be in a
fully opened or fully closed position.
Active Buttons
Active Buttons
MAIN VIEW
ENGINE COOLING DOWN
1200RPM 6.0bar41% 1286h
180s
84s
0s
MAIN VIEW
ENGINE STOPPING
--RPM 5.3bar41% 1286h
To Next Page
Loading...
Need help?
General
