Atlas Copco U190 PACE KD WUX User Manual

- 50 -
FAULT CODES
The list below is a general list. The messages
contained herein do not necessarily apply to your
machine.
There are several parameters that are continuously
watched.
When one of these parameters exceeds its specified
limit the compressor will react depending the present
status of the control box.
Alarmcode Alarmtext Failclass
1550 MAJOR OVERHAUL ALARM WARNING
2000 EMERGENCY STOP SHUTDOWN
2010 COOLANT LEVEL SHUTDOWN
2020 CHECK AIR FILTER WARNING
3000 FUEL LEVEL LOW 1 WARNING
3010 FUEL LEVEL LOW 2 CONTROLLED STOP
3050 VESSEL PRESSURE HIGH WARNING WARNING
3060 VESSEL PRESSURE HIGH SHUTDOWN SHUTDOWN
3450 BATTERY LOW ALARM INDICATION
3460 BATTERY HIGH ALARM WARNING
4000 LOW PRESSURE ELEMENT TEMP ALARM INDICATION
4050 AMBIENT TEMP ALARM 1 INDICATION
4060 AMBIENT TEMP ALARM 2 INDICATION
6190 CHARGE MONITORING WARNING
7010 ENGINE SPEED ALARM 1 SHUTDOWN
7020 ENGINE SPEED ALARM 2 SHUTDOWN
7030 ENGINE COOLANT TEMP WARNING
7040 ENGINE OIL PRESSURE WARNING
7050 ENGINE AIR INLET TEMP WARNING
7070 ENGINE LOAD ALARM SHUTDOWN
7080 AMBIENT TEMP ALARM INDICATION
7100 ECU DPF SOOT LOAD HIGH WARNING
7110 PLEASE FORCE DPF REGENERATION ! INHIBIT LOAD
7120 LOAD PREVENTION - HIGH DPF SOOT LOAD CONTROLLED STOP
7130 SOOT LOAD TOO HIGH - CALL ATLAS COPCO WARNING

Atlas Copco U190 PACE KD WUX Specifications

General

Brand	Atlas Copco
Model	U190 PACE KD WUX
Category	Air Compressor
Language	English