- 34 -
Maintenance
USE OF SERVICE PAKS
Service Paks include all genuine parts needed for
normal maintenance of both compressor and engine.
Service Paks minimize downtime and keep your
maintenance budget low.
Order Service Paks at your local Atlas Copco dealer.
The schedule contains a summary of the maintenance
instructions. Read the respective section before taking
maintenance measures.
When servicing, replace all disengaged packings, e.g.
gaskets, O-rings, washers.
For engine maintenance refer to Engine Operation
Manual.
The maintenance schedule has to be seen as a
guideline for units operating in a dusty environment
typical to compressor applications. Maintenance
schedule can be adapted depending on application
environment and quality of maintenance.
PREVENTIVE MAINTENANCE SCHEDULE
MAINTENANCE SCHEDULE COMPRESSOR
To determine the maintenance intervals, use service hours, or calendar time, whichever occurs first.
Service hours Daily 50 hrs
after initial
start-up
Every
500 hrs
Every
1000 hrs
Yea rl y
Service pak
Engine oil filter
Standard fuel system
2913 3087 00
2912 4517 05 2912 4518 06
Heavy duty fuel system 2912 4520 05 2912 4521 06
For the most important subassemblies, Atlas Copco has developed service kits that combine all wear parts. These service kits offer you the benefits
of genuine parts, save on administration costs and are offered at reduced price, compared to the loose components. Refer to the parts list for more
information on the contents of the service kits.
Drain water from fuel filter x
Check on abnormal noise x
Check for leaks in engine-, compressor-, air-, oil-, or fuel system xxxx
Check electrolyte level and terminals of battery xxxx
(to be continued on page 35)
To Next Page
Loading...
Need help?
General
