3.20 Modifying service settings
Control panel
Function
To modify a number of service settings. Consult the menu flow in section Control programs.
Procedure
Starting from the Main screen (see Main screen menu):
• Press key “Menu” (F1).
• Press key (1) until “Modify settings” is shown.
• Activate the menu by pressing key “Select” (F2).
• The first item (“Regulation”) is shown. Press keys (1) to scroll to “Service”.
• Press key “Select” (F2) and use keys (1) to scroll to the setting to be modified.
• For each setting, the modifying procedure is similar to the example below.
Modifying the the setting for the oil service life
• Consult the section above for selecting the option “Service”.
• Press key “Select” (F2). The first item is shown.
• Use keys (1) to scroll to “Oil Lifetime”. Press key “Select” (F2). A display similar to that shown
below will appear:
Running hours 944 hrs
Programmable settings
Service Maximum 16000 hrs
Menu Modify
F1 F2 F3
• To modify the setting of the oil service life, press the key “Modify” and use scroll keys (1).
• Use the key ”Program” to program the new value or the key “Cancel” to cancel the modification
operation (the original value will be retained).
Instruction book
2920 1815 04 63
To Next Page
Loading...
Need help?
General
