Fast Track Guide 7. Upgrading the Mediant 1000
Version 5.0 33 October 2006
6. When you have loaded all the required files, click Next until the ‘Finish’ screen appears
(refer to Figure
7-4). The Next button is disabled. Complete the upgrade process by clicking
Reset or Cancel.
• Click Reset, the Mediant 1000 ‘burns’ the newly loaded files to flash memory. The
‘Burning files to flash memory’ screen appears. Wait for the ‘burn’ to finish. When it
finishes, the ‘End Process’ screen appears displaying the burned configuration files
(refer to Figure
7-5).
• Click Cancel, the Mediant 1000 resets, utilizing the files previously stored in flash
memory. (Note that these are NOT the files you loaded in the previous wizard steps).
Figure 7-4: 'Finish' Screen
Figure 7-5: ‘End Process’ Screen
7. Click the End Process button; the ‘Quick Setup’ screen appears and the full Web application
is reactivated.
To Next Page
Loading...
Need help?
General
