Version 6.6 11 April 2012
Hardware Installation Manual 2. MP-11x Hardware Installation
4. Ensure that in addition to the MP-11x unit, the package contains the following items:
• AC power cable.
• Small plastic bag containing four anti-slide bumpers for desktop installation.
• Regulatory Information document.
5. Check, retain, and process any documents.
6. Notify AudioCodes or your local supplier of any damage or discrepancies.
2.3 Mounting MP-11x
The device can be mounted in one of the following ways:
Desktop mounting - see 'Desktop Mounting' on page 12
Wall mounting - see 'Wall Mounting' on page 12
Standard 19-inch rack mounting - see '19-inch Rack Mounting' on page 12
The figure below shows the mounting components on the underside of MP-11x:
Figure 2-3: MP-11x Underside
Table 2-3: Mounting Components on MP-11x Underside
Item # Description
1
Square slot used to attach anti-slide bumpers (for desktop mounting).
2
Screw opening used to attach MP-11x to a 19-inch shelf rack.
3
Oval notch used to attach MP-11x to a wall.
To Next Page
Loading...
Need help?
General
