2.4.6 Connecting MP-11x to Power
MP-11x is powered from a standard alternating current (AC) electrical outlet.
Warnings:
• The device must be connected only by professional service personnel.
• Ensure that the device connects to an electrical socket outlet that
provides protective earthing (grounding). Prior to connecting power, refer
to the Regulatory Information document supplied with the device.
• Use only the AC power cord supplied with the device.
To connect MP-11x to the power supply:
1. Connect the line socket of the AC power cord (supplied) to the device's AC power
socket (labeled 100-240V 0.3A ~50-60 Hz), located on the rear panel.
Figure 2-18: Connecting to the Power Supply
2. Connect the plug at the other end of the AC power cord to a standard electrical outlet.
To Next Page
Loading...
Need help?
General
