Mediant 1000 Digital
Fast Track Guide 16 Document #: LTRT-63802
3.4 Configuring the Mediant 1000 Basic Control Protocol
Parameters
To configure the Mediant 1000 basic control protocol parameters use the Embedded Web
Server’s ‘Quick Setup’ screen.
NOTE THE FOLLOWING SEPARATION IN THIS GUIDE
For MGCP / MEGACO, refer to Section 3.4.1 on page 17.
For H.323, refer to Section 3.4.2 on page 19.
For SIP, refer to Section 3.4.3 on page 21.
When you have completed the above relevant section you are then ready to start using the
Mediant 1000. For information on how to fully configure the VoIP gateway, refer to the digital
Mediant 1000
User’s Manuals.
Tip: Once the gateway is configured correctly back up your settings by making a
copy of the VoIP gateway configuration (ini file) and store it in a directory on your
PC. This saved file can be used to restore configuration settings at a future time.
For information on backing up and restoring the gateway’s configuration refer to
Section 5 on page 27.
Note: The following configuring Sections from here up to and including Section 3.4.3
on page 21 apply individually to MGCP/MEGACO, H.323, or SIP.
MGCP/MEGACO configuring continues with Section 3.4.1 on page 17.
H.323 configuring continues with Section 3.4.2 on page 19.
SIP configuring continues with Section 3.4.3 on page 21.
To Next Page
Loading...
Need help?
General
