11.5. Output Format Setting
11.5.1. PGM Image Setting
User can set Brightness, Contrast, Saturation of PGM output in the menu. The setting range is from
0%-100%. The default setting is 50%.
11.5.2. PGM and Multiview Format
The switcher supports up/ down scaling output. Besides, user can switch the Frame Rate Mode between
Integer or Decimal. When the Frame Rate Mode is integer, there are 1080i50, 1080i60, 1080p24,
1080p25, 1080p30, 1080p48, 1080p50, 1080p60 options available. When the Frame Rate Mode is
Decimal, there are 1080i50, 1080i59.94, 1080p23.98, 1080p25, 1080p29.97, 1080p47.95, 1080p50,
1080p59.94 options available. The default format of PGM and Multiview is 1080p60.
11.5.3. PGM and Multiview Color Space
There are YUV, RGB Full, RGB Limit color space options for PGM and Multiview out. The default color
space of the output is YUV.
11.6. FTB
FTB (Fade to black) feature is usually for some emergent situation when user the switcher for an event.
When press FTB button the PGM will be faded to black screen to hide all other layers, and the FTB button
will keep flashing until user press the button again to stop the FTB.
Note: When the PGM window display black and keep black even after transition, please check if the FTB
button flashing.
To Next Page
Loading...
Need help?
General
