Shipping • 145
Shipping
Shipping
The MultiClamp 700A is a solidly built instrument designed to survive shipping
around the world. However, in order to avoid damage during shipping, the
MultiClamp 700A must be properly packaged.
In general, the best way to package the MultiClamp 700A is in the original factory
carton. If this is no longer available, we recommend that you carefully wrap the
MultiClamp 700A in at least three inches (75 mm) of foam or "bubble-pack" sheeting.
The wrapped instrument should then be placed in a sturdy cardboard carton. Mark the
outside of the box with the word FRAGILE and an arrow showing which way is up.
We do NOT recommend using loose foam pellets to protect the MultiClamp 700A. If
the carton is dropped by the shipper, there is a good chance that the instrument will
shift within the loose pellet packing and be damaged.
If you need to ship the MultiClamp 700A to another location, or back to the factory,
and you do not have a means to adequately package it, Axon Instruments can ship the
proper packaging material to you for a small fee. This may seem an expense you
would like to avoid, but it is inexpensive compared to the cost of repairing an
instrument that has sustained shipping damage.
It is your responsibility to package the instrument properly before shipping. If the
packaging is inadequate, and the instrument is damaged during shipping, the shipper
will not honor your claim for compensation.
To Next Page
Loading...
Need help?
General
