ii
WARNING
Never allow gases that are within explosive limits to pass through this device. Doing so could
result in an explosion.
Do not use this device for oxygen gas. Doing so could result in a serious accident.
Safety Precautions
CAUTION
Be sure to use this device within the flow rate range stated in the specifications. To prevent
excessive flow, use a suitable means to control the supply pressure or use a throttle valve or
the like to control the flow rate.
If damage could result from the abnormal functioning of this device, include appropriate redun-
dancy in the system design.
If there is a risk of a power surge caused by lightning, use Azbil Corporation's SurgeNon to
prevent possible fire or equipment failure.
When carrying the flowmeter or connecting it to the pipe, do not hold it by the measurement
module. Doing so could cause damage, or the device could drop, causing an injury.
To avoid damaging this device, do not use it outside of the operating pressure range. Also, do
not subject it to a pressure above its pressure resistance.
When maintaining or replacing the measurement module, release the internal pressure of this
device before removing the measurement module.
To Next Page
Loading...
Need help?
General
