Table of Contents
RIGGING & ASSEMBLY INSTRUCTIONS » SERIES 1500 COOLING TOWER
1 Introduction
2 Safety
2 Shipping
2 Pre-Rigging Checks
3 Unit Weights
3 Anchoring
3 Cold Weather Operation
3 Location
3 Warranties
4 Unit Operation
2 Rigging & Assembly
4 Rigging
5 Single-Cell Installation
5 Two Piece Section Assembly
6 Multi-Cell Installation
6 Multi-Cell Unit Assembly
6 Flume Box Installation
8 Positive Closure Plate Installation
8 Motor Location and Conduit Installation
10 Fan Guard Installation
3 Optional Accessory Installation
11 Bottom Water Outlet/Equalizer/Bypasses
12 Access Door Platform and Ladder
13 Internal Service Platform
14 Internal Service Platform Ladder
15 Internal Ladder Only
16 External Access Platform
17 External Access Platform for Multi-cell Units
18 Ladder Safety Cage
19 Louver Face External Access Platform Ladder
20 Louver Face External Access Platform with End Ladder
21 Fan Deck Handrail
22 Hot Water Basin Handrail for Multi-cell Units
23 Hot Water Basin Handrail Ladder
24 Motor Removal System with Davit Arm
25 Fan Cowl Extensions
25 Basin Accessories
26 Heater Control Panel
To Next Page
Loading...
Need help?
General
