5 Messages and data
This chapter helps you with navigating to information and data of the
thermostat and system.
Next chapter: Installation, page 38
Previous chapter: Customisation, page 21
First chapter: Manual menu, page 5
5.1
Outside temperature
You can read the outside temperature if an external temperature sensor is
connected to your installation.
1. Enter the main menu.
2. Select Outside Temperature.
3. Confirm the selection.
The display shows the current outside temperature.
5.2
Energy consumption
The thermostat can display the energy that was used for heating and hot
tap water supply from the moment of first use of the appliance.
Important
This menu item is only available for combi appliances. An
appliance that can produce both central heating water and hot
tap water.
This menu item is not available for appliances with an on/off
communication protocol.
1. Enter the main menu.
2. Select Energy Consumption.
3. Confirm the selection.
The thermostat displays the current energy consumption.
5.3 Installer details
The thermostat can display the name and telephone number of the
installer for ease of contact.
1. Enter the main menu.
2. Select Installer Contact Details.
The thermostat displays the contact details of your installer.
Important
The installer contact details can be edited in the app on your
mobile device.
5.4
Appliance data
The thermostat can display some appliance data from your heating
installation. If your appliance supports this function, you can read the
water pressure and water temperature.
Important
This menu item is not available for appliances with an on/off
communication protocol.
1. Enter the main menu.
2. Select Heater.
3. Select Water pressure or Current Boiler Temperature.
The thermostat will now display the appliance data.
5 Messages and data
34 7718216 - v.02 - 26042019
To Next Page
Loading...
Need help?
General
