Beckhoff BK9053 User Manual

Mounting and wiring
BK9053, BK910314 Version: 2.3.0
3 Mounting and wiring
3.1 Dimensions
The system of the Beckhoff Bus Terminals is characterized by low physical volume and high modularity.
When planning a project it must be assumed that at least one Bus Coupler and a number of Bus Terminals
will be used. The mechanical dimensions of the Bus Couplers are independent of the fieldbus system.
Fig.4: Dimensions
The total width in practical cases is composed of the width of the Bus Coupler, the KL9010 Bus End
Terminal and the width of the bus terminals in use. Depending on function, the Bus Terminals are 12 or
24mm wide. The front wiring increases the total height of 68 mm by about 5 to 10mm, depending on the
wire thickness.
Mechanical data BKxxxx
BCxxxx
BKxx50
BCxx50
BXxxxx LCxxxx
Design form compact terminal housing with signal LED
Material Polyamide
(PA 6.6)
Polyamide
(PA 6.6)
Polycarbonate Polyamide
(PA 6.6)
Dimensions (W x H x D) 49 x 100 x 68mm 44 x 100 x 68mm 81 (BX8000 61) x 100 x
89mm
21 x 100 x 68mm
Mounting on 35 mm C-rail in accordance with EN 60715 with latching
Stackable by Double groove-tongue connection
Labelling Standard terminal block labelling
Vibration/shock
resistance
conforms to EN 60068-2-6 / EN 60068-2-27
EMC immunity/
emission
conforms to EN 61000-6-2 / EN 61000-6-4

Beckhoff BK9053 Specifications

General

Brand	Beckhoff
Model	BK9053
Category	Industrial Electrical
Language	English