Beckhoff EL34 Series User Manual

Commissioning
EL34xx158 Version: 1.5
6.7.2 EL3423
6.7.2.1 Restore object
Index 1011 Restore default parameters
Index
(hex)
Name Meaning Data type Flags Default
1011:0
Restore default parame-
ters [}289]
Restore default parameters UINT8 RO 0x01 (1
dec
)
1011:01 SubIndex 001 If this object is set to "0x64616F6C" in the set value dia-
log, all backup objects are reset to their delivery state.
UINT32 RW 0x00000000 (0
dec
)
6.7.2.2 Configuration data
Index 80n0 PMX settings (for ch.1, n = 0; ch.2, n = 1; ch.3, n = 2)
Index (hex) Name Meaning Data type Flags Default
80n0:0 PMX Settings Max. subindex UINT8 RO 0x13 (19
dec
)
80n0:11 Voltage Transformer
Ratio
If a voltage transformer is used, its transmission ratio
can be entered here.
REAL32 RW 0x3F800000
(1065353216
dec
)
80n0:12 Current Transformer
Ratio
The ratio of the current transformer used can be en-
tered here.
REAL32 RW 0x3F800000
(1065353216
dec
)
80n0:13 Current Transformer
Delay
Here you can enter a possible time delay of the cur-
rent transformers in milliseconds.
REAL32 RW 0x00000000 (0
dec
)
Index 80n1 PMX Guard Settings (for ch.1, n = 0; ch.2, n = 1; ch.3, n = 2)
Index (hex) Name Meaning Data type Flags Default
80n1:0 PMX Guard Settings Max. subindex UINT8 RO 0x14 (20dec)
80n1:11 Voltage Guard Min
Error
Lower limit value for a voltage error message REAL32 RW 0x40000000
(1073741824dec)
80n1:12 Voltage Guard Min
Warning
Lower limit value for a voltage warning message REAL32 RW 0x434F0000
(1129250816dec)
80n1:13 Voltage Guard Max
Warning
Upper limit value for a voltage warning message REAL32 RW 0x437D0000
(1132265472dec)
80n1:14 Voltage Guard Max
Error
Upper limit value for a voltage error message REAL32 RW 0x438B0000
(1133182976dec)

Beckhoff EL34 Series Specifications

General

Brand	Beckhoff
Model	EL34 Series
Category	Touch terminals
Language	English