Product overview
28
─── Version: 1.0XPlanar
3.6
Intended use
The XPlanar may be operated exclusively for the activities foreseen
and defined in this documentation, taking into account the pre-
scribed environmental conditions.
The components must be installed in electrical systems or machines
and may only be put into operation as integrated components of the
system or machine.
All components of the XPlanar are intended only to be programmed
and commissioned with the help of the Beckhoff TwinCAT automa-
tion software.
Read the entire drive system documentation:
• This translation of the original instructions
• Translation of the original instructions for the control computer
• Complete machine documentation provided by the machine
manufacturer
3.6.1Improper use
Any use exceeding the permissible values specified in the Technical
data is considered improper and therefore prohibited.
The XPlanar is not suitable for use in the following areas:
• in ATEX zones without a suitable housing
• in areas with aggressive environments, for example aggressive
gases or chemicals
When operating beyond the specified IP class, the relevant stan-
dards and guidelines for EMC interference dispatches must be ad-
hered to.
To Next Page
Loading...
Need help?
General
