BenQ XL2410T User Manual

8 How to assemble your monitor hardware
You might want to adjust the monitor stand height. See
Adjusting the monitor stand height on page 11 for
more information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the PC video cable
Do not use both DVI-D cable and D-Sub cable on the
same PC. The only case in which both cables can be
used is if they are connected to two different PCs with
appropriate video systems. (Not available for
analog-only models).
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
-5
O
~ +20
O
Either
Downloaded from ManualMonitor.com Manuals

BenQ XL2410T Specifications

General

Pixel pitch	0.272 x 0.272 mm
Aspect ratio	16:9
Response time	2 ms
Display diagonal	23.6 \
Viewable size diagonal	599.4 mm
Viewing angle, vertical	160 °
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	170 °
Digital vertical frequency	50 - 120 Hz
Digital horizontal frequency	24 - 83 kHz
Display brightness (typical)	300 cd/m²
Bandwidth	0.33 GHz
Display viewable area (HxV)	521.28 x 293.22 mm
HDCP	Yes
DVI-I ports quantity	0
Power consumption (typical)	40 W
Power consumption (PowerSave)	2 W
Certification	CE, TÜV TCO 5.1
Product color	Black
Market positioning	Gaming
Tilt angle range	-5 - 20 °
Cable lock slot type	Kensington
Panel mounting interface	100 x 100 mm
Package weight	9400 g

Weight and Dimensions

Depth (with stand)	63 mm
Height (with stand)	348.4 mm
Depth (without stand)	181.3 mm
Width (without stand)	570 mm
Height (without stand)	347.4 mm
Weight (without stand)	6370 g