Bernard Controls AQ Switch Series User Manual

English
13
7.4 Wiring with positioner option
7.4.1 Power terminal block

 See Chapter 11 for more information on the wiring.
The power terminal block is located on a side of the electronic
assembly and consists of a screw-type terminal.
For three-phase supply, the positioner provides automatic phase
correction, thus phase sequency is not important. If one of the
phases is missing, the actuator does not start and sends an alarm
(Fault relay).
3Ph: L1, L2, L3
1Ph: L (Live), N (Neutral)
Tighten the sealing nut on the cable gland when you have completed
wiring.

Bernard Controls AQ Switch Series Specifications

General

Brand	Bernard Controls
Model	AQ Switch Series
Category	Switch
Language	English