Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
34 / 39
6. Configure the motherboard
6.1 ssh connect to device
1. Install the ssh application Mobaxterm:
https://mobaxterm.mobatek.net/download-home-edition.html
2. Insert Micro SD card to MANTA M8P, wait for system to load after power on,
aprox. 1-2min
3. The device will automatically be assigned a IP address after successfully
connected to the network
4. Find the device IP address in your router page
5. Or use the https://angryip.org/ tool，scan all IP address in the current network
organize by names, find the IP named Fluidd, Mailsail (CM4) or Hurakan
(CB1) like shown below
To Next Page
Loading...
Need help?
General
