Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
38 / 39
6.4 Configure Klipper
1. Enter your device IP address into your browser to open the webUI，find the
reference config for motherboard in the directory shown below，if there is no
such config available, update your klipper source code to the newest version
or download from github: https://github.com/bigtreetech/Manta-M8P
2. Upload your finished config file into Configuration Files, and rename to
“printer.cfg”
3. Insert the correct motherboad ID
Refer to https://www.klipper3d.org/Overview.html for detailed configuration
guide according to your machine type.
To Next Page
Loading...
Need help?
General
