P35D2-A7
30
IRQ Resources
This submenu will allow you to assign each s ys tem interrupt a type, depending
on the type of device using the interrupt. When you press the “Press Enter” tag,
you will be directed to a submenu that will allow you to configure the system
interrupts. This is only configurable when “Resources Controlled By” is set to
“Manual”.
IRQ-3 assigned to PCI Device
IRQ-4 assigned to PCI Device
IRQ-5 assigned to PCI Device
IRQ-7 assigned to PCI Device
IRQ-9 assigned to PCI Device
IRQ-10 assigned to PCI Device
IRQ-11 assigned to PCI Device
IRQ-12 assigned to PCI Device
IRQ-14 assigned to PCI Device
IRQ-15 assigned to PCI Device
PCI / VGA Palette Snoop
Some old graphic controllers need to “snoop” on the VGA palette and then map
it to their display as a way to provide boot information and VGA compatibility.
This item allows such snooping to take place.
The Choices: Disabled (default), Enabled.
Assign IRQ For USB
This item allows the users to choose which IRQ to ass ign for the USB.
The Choices: Enabled (default), Disabled.
Ma xi mu m Pa ylo ad Size
Set the maximum payload s ize for Transac tio n pac kets (TLP).
The Choice: 4096 (default.), 128, 256, 512, 1024, 2048.
To Next Page
Loading...
Need help?
General
