P35D2-A7
35
This action will boot-up the system according to FSB of the processor
It’s strongly recommended to set CPU Vcore and clock in default setting. If the
CPU Vcore and clock are not in default setting, it may cause CPU or M/B
damage.
PCIE Clock Select
The Choices: Fixed 100 (default), Manual.
PCIE Clock
The Choices: 100 (default), Min=100; Max=200; key in DEC number.
System Memory Frequency
The Choices: Auto (default), 677Mhz, 800Mhz.
DRAM Configuration
DRAM Timing Selectable
When synchronous DRAM is installed, the number of clock cycles of CAS
latency depends on the DRAM timing. This item allows you to choose between
auto and manual adjusting DRAM Timing.
The Choices: By SPD (default), Manual.
To Next Page
Loading...
Need help?
General
