CHAPTER !: Specifications
11
User Controls — All models:
Keyboard commands;
On-screen menus;
SW721A-R5:
(3) Front-mounted pushbuttons:
“ON/OFF” (power), “+” (switch to next port), and
“–” (switch to previous port);
All models except SW721A-R5:
(2) Front-mounted pushbuttons:
“▲” (switch to next port) and “▼” (switch to
previous port);
(1) Rear-mounted rocker switch for power
Interfaces — RS-232 port: EIA/TIA RS-232 proprietarily pinned on
RJ-12 (“6-wire RJ-11”) connector, DTE;
CPU and MONITOR/KEYBOARD/MOUSE ports:
Proprietary composite of IBM PC/AT or PS/2
keyboard, RS-232 or PS/2 mouse, and video (standards
listed above)
Connectors — All rear-mounted;
(1) RJ-12 (“6-wire RJ-11”) female: RS-232;
(1) DB25 female: MONITOR/KEYBOARD/MOUSE;
(1) Power inlet:
SW721A-R5: 5-pin DIN female;
All other models: IEC 320 male;
DB25 female CPU ports:
SW721A-R5: (2);
SW722A-R5: (4);
SW723A-R5, KV3108SA-R5: (8);
SW724A-R5: (12);
SW725A-R5: (16)
Indicators — All front-mounted LEDs;
All models: (1) for ServSwitch unit: POWER;
SW721A-R5: (4) for CPUs: (2) SELECT, (2) POWER;
SW722A-R5: (8) for CPUs: (4) SELECT, (4) POWER;
SW723A-R5, KV3108SA-R5: (16) for CPUs: (8) SELECT,
(8) POWER;
SW724A-R5: (24) for CPUs: (12) SELECT, (12) POWER;
SW725A-R5: (32) for CPUs: (16) SELECT, (16) POWER
To Next Page
Loading...
Need help?
General