Black Box ServSwitch SW724A-R5 User Manual

SERVSWITCH™
62
5.3.1 Configure Computers: Computer Name
Each computer can be given a name consisting of up to 16 characters. These
names appear as labels in the “Computer select” window (see Section 5.6). To
change a computer name, press [Enter] while the corresponding “Computer
name” field is highlighted. An “Input new name” box appears, as shown in
Figure 5-6 below. (The default computer names are “Computer n,” where n is the
port number, also as shown below.)
Figure 5-6. Changing a computer’s name.
Type in a new name at the shared keyboard. All ASCII characters are valid in the
name field. The backspace key can be used to edit the field. When you have
finished typing in the name, hit [Enter]. The input box disappears and the new
name appears in the appropriate “Computer name” field.

Black Box ServSwitch SW724A-R5 Specifications

General

Brand	Black Box
Model	ServSwitch SW724A-R5
Category	Switch
Language	English