Auto CPAP / CPAP System User Manual V1.0
35 / 51
The backlight of the LCD screen can be set to ―Auto‖
or ―On.‖ Turn the Knob to choose between the
two modes. If it is set to ―Auto,‖ the backlight will
turn off automatically after 30 seconds of inactivity.
If it is set to ―On,‖ the backlight will always be on.
Full Face;
Nasal; Pillow;
Other
There are three mask types available, Full Face
(full-face mask), Nasal (nasal mask), and Pillow
(nasal pillow mask). The default mask type is
―Nasal,‖ but the patient can choose other suitable
masks as well. When selecting masks other than the
above three types of BMC masks, the patient can
identify the masks as other.
Start the
Mask Fititing
Test
Test whether the mask is worn correctly,the screen
will display the "great" icon if it is qualified, otherwise
the screen will display the "need to adjust" icon.
iCode,
iCode QR,
iCode QR +
iCode provides access to the patient's compliance
data during a recent time period. The iCode mode
displays data in sequences of numbers, and the
iCode QR / iCode QR + mode displays data in
two-dimensional codes
Connect to WiFi network by adjusting this option
Use Time displays how long has the device been
used by the patient. The use time can be erased
Reset the use time of the filter, tubing and mask
30 days/60
days/180
days/1
year/off
This function is used for setting filter reminder, tube
reminder and mask reminder. After opening, can set
the use time of filter, tube and mask.
English/
Español/
Português/
Deutsch/
中文（简体）
/Français/
Polski/
Italiana/
Türk/
Русский/
Nederlands/
Ελληνικά/
한국어
Turn the Knob to choose among the two
languages available. The setting is only valid when
the device is inserted a SD card with language pack.
Displays related information of the device (Model,
SN, Version, ID). This is read-only and cannot be
edited.
To Next Page
Loading...
Need help?
General
