BMW 2 Series - On the Move

On the move
Driving
Drive-ready state
Switching on drive-ready state
1. Press the brake.
2. Press the Start/Stop button.
Switching off drive-ready state
1.
With the vehicle at a standstill, engage se-
lector lever position P.
2. Apply the parking brake.
3. Press the Start/Stop button.
The engine is switched off.
Automatic Start/Stop function
The Automatic Start/Stop function switches
the engine off automatically when stationary
to save fuel. For driving off, the engine starts
automatically under the following conditions:
▷
By releasing the brake pedal.
▷ With Automatic Hold activated: press the
accelerator pedal.
Steptronic transmission
Engaging selector lever positions D, N,
R, S
▷ D Drive position.
▷ N Neutral.
▷ R reverse gear.
▷ S Sport programme.
Keep the brake applied until ready to drive off,
otherwise the vehicle will move when drive po-
sition or reverse gear is selected.
Only engage selector lever position R when the
vehicle is stationary.
Sport programme: the shift characteristics are
designed for sportier drivability.
Engaging selector lever position P
Only engage selector lever position P when the
vehicle is stationary.
Press button P.
Seite 29
On the move
QUICK REFERENCE
29
Online Edition for Part no. 01405A5E758 - VI/22