Everything under control
52
To reset the average consumption: press the
button in the turn indicator stalk for approx.
2seconds.
Settings and information
Operating principle
1 Button for:
> Selecting display
> Setting values
2 Button for:
> Confirming selected display or set val-
ues
> Calling up computer information 51
3 When the lights are switched on: instrument
lighting brightness 66
4 Calling up Check Control 55
5 Checking engine oil level* 100
6 Initialising the Run Flat Indicator 60
7 Setting the clock 54
8 Adjusting the date 55
9 Viewing Next Service indicator 53
10 Setting formats and units of measure 52
Exiting displays
The outside-temperature reading and the time
reappear when you press button 2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Formats and units of measure
You can set formats and units of measure. The
settings are saved for the remote control cur-
rently in use, see also Personal Profile on
page 17.
> Fuel consumption: l/100km, mpg, km/l
> Distance covered: km, mls
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG
To Next Page
Loading...
Need help?
General
