Reference OverviewControlsDriving hintsMobility
69
Air conditioner
1 Air distribution
2 Recirculated-air mode
3 Air flow rate
4 Cooling function
5 Temperature
6 Rear window heating
Air distribution
Direct the flow of air to the win-
dows , to the upper body area
or to the footwell . Intermedi-
ate settings are possible.
Recirculated-air mode
If the air outside the car has an
unpleasant odour or contains pol-
lutants, shut off the supply to the
interior of the car temporarily. The
air inside the car is recirculated.
You can also activate/deactivate recirculated-
air mode by means of a button
* in the steering
wheel, see page 9.
If the windows fog over in the recircu-
lated-air mode, switch it off and, if neces-
sary, increase the air flow rate.
The recirculated-air mode should not be used
continuously for lengthy periods, as the quality
of the air inside the car will otherwise gradually
deteriorate.<
Air flow rate
Adjust the air flow. The higher the
rate, the more effective the heating
or cooling will be.
Switching the system on/off
Turn the air flow rotary switch to 0. Blower and
air conditioner are completely switched off and
the air supply is cut off.
To switch on the air conditioner, set the desired
air flow.
Switching cooling function on/off
When the cooling function is on, air
is cooled and dried, then reheated
according to the temperature set-
ting.
Depending on weather conditions, the wind-
screen may fog over momentarily when the
engine is started.
Rear window heating
When the rear window heater is
switched on, the LED comes on.
The heater switches off automati-
cally after a certain time.
Temperature
To increase the temperature, turn
the knob clockwise towards red.
To cool the air, turn the knob coun-
ter-clockwise towards blue.
Online Edition for Part-No. 01 41 0 159 204 - © 03/05 BMW AG
To Next Page
Loading...
Need help?
General
