Radio
150
Selecting a station
Selecting station manually
To search for a particular station by
selecting its frequency
Scanning
To start scanning:
Extended pressure.
The scan mode begins with the currently
selected frequency.
The scan mode is stopped as soon as a
station is found.
The frequency of the station appears in the
bottom status line, refer to page 24.
Next station
Press to select the desired direction.
The next station that appears in the Control
Display is displayed.
Sampling and selecting – Scan
The automatic scan search feature auto-
matically plays a brief sample from each
station in the selected waveband.
1. Select "SCAN" in the Control Display
and confirm your selection.
Station search starts
2. To select a station:
Confirm "SCAN" a second time.
This cancels the scan function, and the
radio remains on the current station.
Storing and retrieving a
station
Memory locations
Your radio can store 36 stations:
> You can store as many as 18 stations in
the FM waveband
> You can store up to 18 stations in the
AM waveband.
Each time you confirm "AM..." the
system alternately switches between
the AM waveband and the "Autostore"
mode.
Each time you confirm "FM...", the system
alternately switches between "Memorized
Stations" and the "Autostore" mode.<
Storing a station
1. Select "Memory" and confirm your
selection
2. Select frequency band
"M FM" or "M AM"
Each time you confirm "M AM" the
system alternately switches between
the AM waveband and the "Autostore"
mode.
Each time you confirm "M FM...", the
system alternately switches between
"Memorized Stations" and the
"Autostore" mode.
3. To select a station:
> "SCAN"
The stations are played briefly one after
the other and selected by operating this
function once again
1. {Radio}
2. {Frequency 87 ..107 (Point 0 ..9)}.
1. {Radio}
2. {Next station} or {Station back}.
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG
To Next Page
Loading...
Need help?
General
