Adjustments
54
1. Select "Settings"
2. Confirm
3. Select "MFL". Continue to press the
controller until the desired function
appears:
> "Recirc. air"
In this mode the supply of outside air
remains blocked, refer to AUC Auto-
matic recirculated-air control on
page 107
> "Navi info"
To repeat the most recent message
from the navigation system, refer to
page 139
> "AUTO P"
To activate/deactivate Automatic Hold,
refer to Automatic Hold on page 63.
You can select the displayed function using
the button in the steering wheel.
If you have activated the Automatic
Hold feature, refer to page 63, you
can use the button to deactivate the
system for parking maneuvers, etc.<
Seat, mirror and steering
wheel memory
You can store and select two different
adjustment settings for the driver's seat,
exterior mirrors and steering wheel.
If your vehicle is equipped with comfort
seats, you can also store and set two
seating positions for each additional seat
with a memory.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1. Radio mode, or switch on ignition
2. Set desired seating position; for driver's
seat also the outside mirror and
steering wheel position
3. Press
MEMORY button:
The indicator lamp within the button
comes on
4. Press the desired memory button 1 or 2:
The indicator lamp goes out.
Selecting a stored setting
Convenience mode
1. Driver's door open after unlocking or
ignition lock in radio position
2. Briefly press the desired memory
button, 1 or 2.
The system immediately cancels the
adjustment procedure when you press one
of the seat adjustment buttons or use one
of the memory buttons.
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG
To Next Page
Loading...
Need help?
General
