WARNING
Uncoordinated settings of
spring preload and spring
strut damping.
Poorer handling.
Adjust damping characteristic
to changed spring preload.
To increase spring preload,
turn adjustment wheel 1 clock-
wise using toolkit.
To decrease spring preload,
turn adjustment wheel 1 coun-
terclockwise using toolkit.
Basic setting of spring
preload, rear
Turn adjustment wheel coun-
terclockwise as far as possible
(One-up without load)
Turn adjustment wheel as far
as possible counterclockwise,
then 12 turns clockwise (One-
up with load)
Turn adjustment wheel as far
as possible counterclockwise,
then 18 turns clockwise (One-
up with load and topcase)
Turn adjustment wheel clock-
wise as far as possible (Two-
up with load and topcase)
Remount toolkit.
Install the seat ( 54).
Damping
Setting
Damping must be adjusted to the
road conditions and the spring
preload.
A rough road surface requires
softer damping than a smooth
road surface.
An increase in spring preload
requires firmer damping, a re-
duction in spring preload re-
quires softer damping.
Adjust damping on rear
wheel
Make sure ground is level and
firm and park motorcycle.
4
50
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
