To increase damping, turn ad-
justing screw 1 clockwise.
To decrease damping, turn ad-
justing screw 1 counterclock-
wise.
Basic setting of rear
wheel rear-wheel damp-
ing
without Electronic
Suspension Adjustment
(ESA)
OE
Turn adjusting screw as far
as possible clockwise, then
turn back 1.5 turns (One-up
without load)
Basic setting of rear
wheel rear-wheel damp-
ing
Turn adjusting screw as far as
possible clockwise, then turn
back 0.5 turns (One-up with
load/two-up with load)
Electronic suspension
adjustment (ESA)
with Electronic Suspension Ad-
justment (ESA)
OE
Adjustment options
You can use the ESA Electronic
Suspension Adjustment feature
to adapt damping on the rear
wheel to the road surface.
Calling up settings
Switch on ignition.
Press button 1 to display cur-
rent adjustment.
The adjusted damping is shown
in the multifunction display, in
area 1. The displays provide the
following information:
4
51
z
Operation
ProCarManuals.com