Phase 1
Check on system components
monitored by the diagnostic sys-
tem while vehicle is parked.
ASC indicator and warning
light flashes slowly.
Phase 2
The diagnostic system evalu-
ates status of monitored system
components while vehicle is un-
derway (at least 3.1 mph [5 km/
h]).
ASC indicator and warning
light flashes slowly.
ASC self-diagnosis
completed
ASC warning lamp goes out.
Watch all warning and indicator
lamps on the display.
An ASC error is indicated follow-
ing completion of the ASC self-
diagnosis routine.
It remains possible to continue
riding. It must be noted that
the ASC function is not avail-
able.
Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
Breaking in
Engine
While running in the motorcy-
cle, vary the throttle opening
and engine-speed range fre-
quently; avoid driving for long
periods at a constant speed.
Choose curvy, slightly hilly sec-
tions of road if possible.
Observe the engine run-in
speeds.
Engine run-in speed
<5000 min
-1
Observe mileage, after which
the first running-in check
should be performed.
Mileage until first
running-in check
311...746 miles
(500...1200 km)
Brake pads
New brake pads must be run in
before they achieve their opti-
mum friction force. This initial
reduction in braking efficiency
can be compensated for by ex-
erting greater pressure on the
brake levers.
WARNING
New brake pads.
6
73
z
Riding
ProCarManuals.com
To Next Page
Loading...
Need help?
General
