Phase 3
The needles on the tachome-
ter and speedometer return to
their initial positions. At the same
time, the previously activated
warning and indicator lights are
now switched off in reverse se-
quence.
If one of the needles fails to
move, or if one of the warning
and indicator lamps fails to light
up:
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ABS self-diagnosis
The self-diagnosis routine
is determining whether
BMW Motorrad ABS is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition. To
check the wheel speed sensors,
the motorcycle must be driven a
few yards.
Phase 1
Check on system components
monitored by the diagnostic sys-
tem while motorcycle is parked.
ABS indicator light flashes.
Phase 2
Check wheel sensors while start-
ing off.
ABS indicator light flashes.
ABS self-diagnosis
completed
The ABS indicator and warning
light goes out.
Check the display of all indica-
tor and warning lights.
An ABS error is indicated follow-
ing completion of the ABS self-
diagnosis routine.
It remains possible to continue
riding. It must be noted that
the ABS function is not avail-
able.
Have the malfunction corrected
as soon as possible at an
authorized service facility,
preferably an authorized
BMW Motorrad Retailer.
ASC self-diagnosis
with Automatic Stability Control
(ASC)
OE
The self-diagnosis routine
is determining whether
BMW Motorrad ASC is ready for
operation. The self-diagnosis
routine runs automatically when
you switch on the ignition.
6
72
z
Riding
ProCarManuals.com
To Next Page
Loading...
Need help?
General
