To Next Page

To Previous Page

Maintenance

108

• Apply uniform pressure to

push the front-wheel stand

down and raise the motor-

cycle.

When the motorcycle is

standing on its centre

stand: if the motorcycle is

raised too far at the front the

centre stand will lift clear of the

ground and the motorcycle

could topple to one side.

When you raise the motorcy-

cle, make sure that the centre

stand remains on the

ground.c

Rear wheel stand

BMW Motorrad offers a rear-

wheel stand for working on a

motorcycle that does not have

a centre stand. The BMW spe-

cial tool number is 363980

and the rear-wheel stand is

available from your authorised

BMW motorcycle dealer.

Installing rear-wheel

stand

• Use screws 1 to set the rear-

wheel stand to the desired

height.

• Press release button 3 and

remove lock washer 2.

Questions and Answers:

Need help?

Do you have a question about the BMW K1200 R and is the answer not in the manual?

BMW K1200 R Specifications

General

Displacement	1157 cc
Transmission	6-speed manual
Frame	Aluminum bridge-type frame
Front Suspension	BMW Motorrad Duolever
Engine Type	Liquid-cooled, 4-stroke, in-line 4-cylinder
Power	163 hp (120 kW) at 10, 250 rpm
Fuel Capacity	19 liters
Seat Height	820 mm
Rear Suspension	BMW Motorrad Paralever
Front Brakes	Dual 320 mm discs, 4-piston calipers
Rear Brakes	Single disc, 265 mm
Dry Weight	211 kg