2
27
Status indicators
ABS
OE
warning
indicators
ABS warnings are indicated by
a combination of the general
warning light and the ABS
warning light. Both warning
lights can light up continuously
or flash once or 4 times per
second.
General warning light
General warning light
lights up red.
Brake switch defective or
incorrectly adjusted. BMW
Integral ABS detects the
rider’s braking request by the
pressure build-up from the
brake lever. There may be an
unusual response from the
brakes. You can continue to
ride. However, bear in mind
that the brakes may respond in
a manner to which you are not
accustomed.
There is a defect in the
brake system that can
lead to delayed braking, with
the corresponding risk of
accidents.
Think well ahead and brake
early, because the braking
effect might be delayed.c
• Have the fault rectified as
quickly as possible by a spe-
cialist workshop, preferably
an authorised BMW motor-
cycle dealer.
ABS
OE
warning light
ABS warning light flashes
once per second.
ABS function not available
because pull-away test
(b 63)
not completed.
You can continue to ride. To
prevent the wheels from
locking:
• Do not use emergency brak-
ing until the pull-away test
has been completed.
To Next Page
Loading...
Need help?
General
