Care
7
124
However, remove particularly
aggressive materials immedi-
ately; otherwise changes in
the paint or discolouration can
occur. These include spilt fuel,
oil, grease, brake fluid and bird
droppings. BMW vehicle
polish or BMW paint cleaner
are recommended here.
Contamination on the paint fin-
ish is particularly easy to see
after the motorcycle as been
washed. Remove stains of this
kind immediately using clean-
ing-grade benzine or petro-
leum spirit on a clean cloth or
ball of cotton wool. We recom-
mend BMW tar remover for
removing specks of tar. Com-
plete the cleaning operation by
applying a protective coating
to these areas.
Protective wax coating
For the protective wax coating
of paint, we recommend that
you use only BMW vehicle wax
or agents that contain car-
nauba wax or synthetic waxes.
The best way to see whether
the paint has to be protected
is that water no longer forms
pearls.
Touching up
Your authorised BMW motor-
cycle dealer has suitable sys-
tems for rapid, cost-effective
treatment of minor paint dam-
age. Minor damage can be
touched up with a BMW paint
spray or a BMW paint pencil,
but it is advisable to have more
serious paint damage dealt
with by an authorised BMW
motorcycle dealer, who can
perform specialised paint jobs
in accordance with factory
specifications, using genuine
BMW paints.
Rubber
Treat rubber components with
water or BMW rubber protec-
tion coating agent.
The use of silicon sprays
to care for rubber
gaskets can lead to damage.
Do not use silicone sprays or
other care products that
contain silicon.c
Laying up
• Clean the motorcycle
(
b 122).
• Remove the battery (
b 118).
• Spray the brake and clutch
lever pivots and the main
and side stand pivots with a
suitable lubricant.
To Next Page
Loading...
Need help?
General
