ATTENTION
Incorrect positioning of the
helmet lock.
Scratch marks on trim panel.
Make sure the lock is out of
the way when you hook the
helmet into position.
Use a plastic-sheathed steel
cable (not part of the vehicle)
to secure the helmet to helmet
holder 1.
Install the rear seat ( 61).
Place the helmet on the front
seat.
Luggage loops
Securing luggage to
motorcycle
Removing rear seat ( 61).
Turn the rear seat upside
down.
Pull loops 1 out of the holders
and to the outside and down.
Install the rear seat ( 61).
Use the loops 1 and the rear
footrests, for example, to se-
cure luggage to the rear seat.
In this process, take care not to
damage the rear trim panels.
4
63
z
Operation
ProCarManuals.com
To Next Page
Loading...
Need help?
General
