SETUP MENU
Selecting a parameter
Select the SETUP MENU and
press and hold down button 2.
Repeatedly press button 1 or
button 2 until the submenu
you want appears on the
display.
Press and hold down button 2
to open the submenu you
want.
Each time button 1 is pressed
the possible parameters
are shown in the sequence
described below; each time
button 2 is pressed the
parameters are shown in reverse
sequence.
SETUP EQUIPMENT
Adjust the alarm system setting
(DWA) DWA AUTO ON/OFF.
Set the time CLOCK TIME.
Adjust display brightness
DISP BRIGHT.
Switch warning for defective
bulbs on/off WARN LAMP.
Switch gearshift light on/off
GSL ON/OFF RPM.
Gearshift-light brightness
GSL BRIGHT
Gearshift-light frequency
GSL FREQ
Change units of measure for
speed, range, temperature, av-
erage consumption, distance
and time UNITS
SETUP RACETRACK
Set LAPTIMER readings: Cur-
rent lap RUN, time required for
preceding lap LAST, best lap
BEST, total of all laps logged
in memory TOTAL, best-ever
lap BEStEV
Display-freeze period for the
most recent time HOLD
Debounce time (time that must
elapse before a new lap can
be started) of the TRIP/INFO
button for operating the LAP-
TIME DEB-TM
Activate or deactivate
BESTLAP BLIP ON/OFF.
Change settings for operating
the LAPTIME by the
headlight-flasher button
and the TRIP/INFO button.
TRIG AUTO: operate by
headlight-flasher button
and TRIP/INFO button;
TRITG MANUAL: operate by
headlight-flasher button only;
EXTERN: operate by TRIP/
INFO button only.
5
75
z
On the race track
ProCarManuals.com
To Next Page
Loading...
Need help?
General
