1 689 975 252 2019-05-15| Robert Bosch GmbH
4 | ACS 511 | Important informationen
2. Important information
Installation and/or repairs must only be performed by
trained and instructed Bosch customer service rep-
resentatives or companies authorized by Bosch If the
units are opened or modified by unauthorized persons,
any warranty claims become void.
Electrical systems and devices must only be put into
operation when in proper operating condition (details
can be found in the EDIS-Info 200108_084). This re-
quirement is met if following modification or repair (ini-
tial testing) it is ensured that the requirements of the
electrical engineering directives were adhered to. To
check this, tests should be performed, the nature and
extent of which are based on the measures specified in
the electrical engineering directives (e.g. in Germany
DGUV Vorschrift 3). The type and extent of the tests are
described in VDE 0701/0702 Part 1 within Germany.
The relevant national directives must be complied with.
3. Test equipment and auxil-
iary materials
R General tools for electricians and A/C mechanics
R Digital multimeter (e.g. MMD 003)
R Loctite 542 (for thread seal) and 222 (for thread
lock)
R Cleaning agent (e.g. brake cleaner)
R Calibrating weights 250 - 500 g for oil bottle scales
R Calibrating weight 10 - 20 kg for internal refrigerant
scales
R Leak detector (1 689 100 057)
R Simulator (optional)
To Next Page
Loading...
Need help?
General
