Bosch AMC2-4W User Manual

Technical Data
Hardware
– Integrated Microcontroller (32 bit, 30 MHz)
– SRAM (256 kB)
– Serial EEPROM
– RTC (real time clock)
– Pluggable Compact Flash card
– Battery for SRAM and RTC
– DIL switch for host settings (address and protocol mode)
– Host interfaces
– Ethernet 10/100 Mbit/s
– RS-485 2-wire or 4-wire
Transfer rate: 38,4 kBit/s,
even parity, 7 bit, 1 stop bit,
– RS-232
Transfer rate: 38,4 kBit/s
no parity, 8 bit, 1 stop bit
– Four Wiegand interfaces for up to four card readers
(Output rating: 280 mA each @ 12Vdc)
– Eight relay outputs
– maximum ratings (wet and dry):
switching voltage: 30 Vdc
switching current: 1,25 A
– operating ratings (wet and dry):
1,25 A @ 30 Vdc
2 A @ 12 Vdc
1,5 A @ 24 Vdc
– Eight analog inputs with tamper detection; only connect dry
contacts
– RS-485 extension interface:
Transfer rate: 9,6 kBit/s,
no parity, 8 bit, 2 stop bit
– Tamper contact for external enclosures
6
Access Modular
Controller
Technical Data | en 55
Bosch Sicherheitssysteme 2016-11 | AMC2-4W |

Bosch AMC2-4W Specifications

General

Brand	Bosch
Model	AMC2-4W
Category	Controller
Language	English